Explore different tutorials
Trim Guide
Lorem Ipsum Dolor
Beam Saw
Lorem Ipsum Dolor
Wood Plank
Lorem Ipsum Dolor
Wet Concrete Saw
Lorem Ipsum Dolor
Protects Cutting Surface
Trim doors in half the time.
Saves Time
Trim doors in half the time.Eliminates layout and setup.
Versatile
Works with almost any circular saw or router for trimming counter-tops, plastic, marble, inlaid floors or concrete.
Accurate
Achieves machined accuracy for any trimming operation.
Weather Resistant
Impervious to water, sun & cold.
Portable
Take it with you to the job site.
Easy To Use
Clamps to any smooth surface.
instructions for cutting guide with a circular saw
Before your begin using your guide you must cut it to fit your particular saw.
Step 1
Clamp the guide to a stable surface with ridge (fence) facing up. For a 7 1/4” saw, use a 24-60 tooth blade.
Step 2
Position circular saw so that the base plate of the saw is touching the fence of the guide.
Step 3
Cut the guide with your saw.
Step 4
Let the guide cool for a minute, then use a sanding block to remove any residue from the cut edge.
Step 5
The Saw Guide can also be cut with a table saw to fit other equipment such as routers & jig saws.
Your saw guide is now ready to use. To maintain exact cutting tolerances, always use the same blade thickness or router bit.
Weather Proof
Impervious to water, sun and snow.
Portable
Light weight, thin. Easy to store.
Affordable
Use your own saw and gettrack saw accuracy
Versatile
Works with cordless orcorded saws.
Environment
Made from recycledplastic.
Cut out wall openings for windows & doors
Vertical cutting can be a challenge especially if you’re cutting a rough surface, like beveled siding, brick, stone, or course stucco. You can accomplish any of these using a Trim Guide and your own saw for wet or dry sawing. Made mostly from recycled plastic, Trim Guides will not crack, chip or get brittle. They can be drilled to allow you to fasten with screws or duplex nails directly to the work surface.Trim Guides can be cut to fit into tight spaces and around obstacles with circular saws or jig saws. Once you have your wall saw set up to cut, now you need to precut the Trim Guide to fit. Measure from the outside edge of the saw base to the inside face of your blade.
Precutting a Trim Guide can be done by making 1 pass with your saw, using a standard wood blade, or a table saw. The Trim Guide now shows you exactly where your blade will cut, with no layout.Set up guides for bevel cutting or straight cuts and your next bit of millwork means all you do is securely fasten the guide to your work surface and you’re ready.
With a Trim Guide you can make precise jigs that do not warp from water, sun, or snow.
Questions? We’re here to answer!
Morem ipsum dolor sit amet, consectetur adipiscing elit. Nunc vulputate libero et velit interdum, ac aliquet odio mattis.
TESTIMONIALS
SUBURBAN
CONSTRUCTION
SUBURBAN CONSTRUCTION
I've been using this Trim Guide for over 7 years. What I like about it is I get a precision cut every time I use it. It takes the guesswork out of setting up and having to recheck your measurements. I use my 8 footer for cutting in sliders, doors and windows over stucco to create a perfect opening. The beauty about it is that you can use clamps or screws to hold the trim guide down so set up is literally seconds. The four footer comes in a handy when you're doing precision finish work.I highly recommend this product.
Bp CONSTRUCTION
BP
CONSTRUCTION
Hi there, I just want to put a comment out there about a tool called the trim guide. I am a general contractor my specialty is hanging doors and that tool comes in real handy when I have to trim the bottom of a whole house of doors it's one of the many Tools in my Arsenal and that is a great tool if you're a door hanger or anything that has to do with carpentry and cutting a straight line I highly recommend the trim guide
-Billy, BP Construction
DBE inc.
DBE inc.
We use skill saws on a daily basis to under cut and under width doors.We need to move quickly but also ensure that the cuts are straight and perfect everytime. We have tried many different skill saw guides and tricks such as levels or homemade wood guides but the Trim Guide is by far the longest lasting and the easiest to use
Big Wave CONSTRUCTION
Big Wave
CONSTRUCTION
I've used Trim Guard for a variety of my personal projects, and I can confidently say it’s now my go-to tool for all my cutting needs. The precision of each cut is unparalleled, outperforming any other tool I’ve used across a range of materials. Whether I’m working with wood, stucco, or even stone, Trim Guard consistently delivers flawless results.
What truly sets it apart, though, is how effortless it is to use. The design makes handling the tool a breeze, eliminating any struggles I’ve faced with other cutting tools. It combines precision with comfort, making it perfect for both detailed and large-scale projects.
If you’re looking for a reliable, versatile cutting tool that guarantees perfect results with ease, I highly recommend Trim Guard. It’s been a game-changer for me!
-Dave, Big Wave Construction
JOIN OUR MAILING LIST!
Get updates on exclusive promos and discounts.
Contact Us
Phone: 949-847-8110
Email: thedoortrimguide@gmail.com
Address: 34111 N. Short Rd
Deer Park, WA, 99006
2023 Trim Guide. All rights reserved.
Privacy Policy
Terms of Service
Legal Disclaimer